elimination of pitting Archives - REM Surface Engineering

Selecting media for optimum vibe bowl gear finishing

Posted by Bill Nebiolo on martedì, Agosto 20th, 2019 in

Choosing the best media depends on structure and shape of the tooth flank, and whether media components should be abrasive, non-abrasive, or a blend....

Gear Corrosion During the Manufacturing Process

Posted by Danny Estrada on martedì, Novembre 19th, 2013 in

No matter how well gears are designed and manufactured, gear corrosion can occur that may easily result in catastrophic failure. Since corrosion is sporadic and a rare event and often difficult to observe in the root fillet region or in finely pitche...

Gear Corrosion During the Manufacturing Process

Posted by Christina Michaud on martedì, Novembre 19th, 2013 in

By: O. El-Saeed and G. Sroka, REM Chemicals Inc. and G. Blake Rolls-Royce Corporation Abstract No matter how well gears are designed and manufactured, gear corrosion can occur that may easily result in catastrophic failure. Since corrosion is s...

The Reduction of Parasitic Friction in Automotive Gearbox and Drive Train Components by the Isotropic Superfinish

Posted by Bill Nebiolo on martedì, Novembre 19th, 2013 in

Microscopic examination of the traditionally ground tooth surfaces of automotive transmission gears reveals a micro-roughness, and unidirectional pattern corresponding to the direction of the gear tooth grinding operation....

Chemically Accelearated Vibratory FInishing for the Elimination of Wear and pitting-Horsepower chart

Chemically Accelerated Vibratory Finishing for the Elimination of Wear and Pitting of Alloy Steel Gears

Posted by Mark Michaud on martedì, Novembre 19th, 2013 in

Chemically Accelerated Vibratory Finishing is capable of refining hundreds of gears per hour to a superfinished isotropic condition....